The measurement of an aspherical mirror by three-dimensional nanoprofiler

Yusuke Tokuta; Kenya Okita; Kohei Okuda; Takao Kitayama; Motohiro Nakano; Shun Nakatani; Ryota Kudo; Kazuya Yamamura; Katsuyoshi Endo

doi:10.1117/12.2191040

28 September 2015 The measurement of an aspherical mirror by three-dimensional nanoprofiler

Yusuke Tokuta, Kenya Okita, Kohei Okuda, Takao Kitayama, Motohiro Nakano, Shun Nakatani, Ryota Kudo, Kazuya Yamamura, Katsuyoshi Endo

Author Affiliations +

Proceedings Volume 9628, Optical Systems Design 2015: Optical Fabrication, Testing, and Metrology V; 962814 (2015) https://doi.org/10.1117/12.2191040
Event: SPIE Optical Systems Design, 2015, Jena, Germany

Abstract

Aspherical optical elements with high accuracy are important in several fields such as third-generation synchrotron radiation and extreme-ultraviolet lithography. Then the demand of measurement method for aspherical or free-form surface with nanometer resolution is rising. Our purpose is to develop a non-contact profiler to measure free-form surfaces directly with repeatability of figure error of less than 1 nm PV. To achieve this purpose we have developed three-dimensional Nanoprofiler which traces normal vectors of sample surface. The measurement principle is based on the straightness of LASER light and the accuracy of a rotational goniometer. This machine consists of four rotational stages, one translational stage and optical head which has the quadrant photodiode (QPD) and LASER head at optically equal position. In this measurement method, we conform the incident light beam to reflect the beam by controlling five stages and determine the normal vectors and the coordinates of the surface from signal of goniometers, translational stage and QPD. We can obtain three-dimensional figure from the normal vectors and the coordinates by a reconstruction algorithm. To evaluate performance of this machine we measure a concave aspherical mirror ten times. From ten results we calculate measurement repeatability, and we evaluate measurement uncertainty to compare the result with that measured by an interferometer. In consequence, the repeatability of measurement was 2.90 nm (σ) and the difference between the two profiles was ±20 nm. We conclude that the two profiles was correspondent considering systematic errors of each machine.

Citation Download Citation

Yusuke Tokuta, Kenya Okita, Kohei Okuda, Takao Kitayama, Motohiro Nakano, Shun Nakatani, Ryota Kudo, Kazuya Yamamura, and Katsuyoshi Endo "The measurement of an aspherical mirror by three-dimensional nanoprofiler", Proc. SPIE 9628, Optical Systems Design 2015: Optical Fabrication, Testing, and Metrology V, 962814 (28 September 2015); https://doi.org/10.1117/12.2191040

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
6 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Mirrors

Error analysis

Head

Interferometers

Photovoltaics

Optical components

Lasers

Show All Keywords

Keywords/Phrases

Search In:

Publication Years