11 October 2015 Freeform grinding and polishing with PROSurf
Author Affiliations +
Proceedings Volume 9633, Optifab 2015; 96331G (2015) https://doi.org/10.1117/12.2195899
Event: SPIE Optifab, 2015, Rochester, New York, United States
Abstract
Recently, the desire to use freeform optics has been increasing, including shapes such as torics and anamorphic aspheres. Freeform optics can be used to expand capabilities of optical systems. They can compensate for limitations in rotationally symmetric optics. These same traits that give freeform optics the ability to improve optical systems also makes them more challenging to manufacture. This holds true for grinding, polishing, and metrology. As freeform optics become more prevalent in the industry, tolerances will become more stringent, requiring deterministic manufacturing processes.

To generate freeforms, it is crucial to have control over all aspects of the process. Controlling the surface definition is important for achieving a better surface finish during processing. Metrology will be required to adjust tool paths at various stages in manufacturing. During grinding, metrology will be used to adjust tool positions relative to the nominal tool path to compensate for repeatable machine and tooling error. For polishing, metrology will be used to deterministically adjust dwell relative to the amount of the error in different surface locations, allowing for convergence towards the desired surface at a uniform rate.

OptiPro has developed PROSurf, a CAM software package for creating freeform tool paths and applying metrology-based corrections. The software can be used for both grinding and polishing freeform optics. The software has flexibility to allow for different methods of modelling the surface: mathematical equations, solid models, and point clouds. The software is designed to make it easier to manufacture and polish complex freeform optics.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Franciscus Wolfs, Franciscus Wolfs, Edward Fess, Edward Fess, Scott DeFisher, Scott DeFisher, Josh Torres, Josh Torres, James Ross, James Ross, } "Freeform grinding and polishing with PROSurf", Proc. SPIE 9633, Optifab 2015, 96331G (11 October 2015); doi: 10.1117/12.2195899; https://doi.org/10.1117/12.2195899
PROCEEDINGS
11 PAGES


SHARE
RELATED CONTENT

Freeform polishing with UltraForm Finishing
Proceedings of SPIE (October 14 2013)
Acylinder and freeform optical manufacturing
Proceedings of SPIE (October 10 2015)
Computer aided manufacturing for complex freeform optics
Proceedings of SPIE (October 15 2017)
Manufacturing of high-precision aspherical and freeform optics
Proceedings of SPIE (September 12 2012)
Cam Optical Fabrication System
Proceedings of SPIE (February 12 1987)

Back to Top