You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
28 September 2015Hydrostatic pressure sensing with surface-core fibers
In this paper, we report the employment of surface-core fibers for hydrostatic pressure sensing. To our knowledge, this is the first demonstration of the use of these fibers for the referenced purpose. Theoretical simulations of the fiber structure were performed in order to estimate fiber phase and group birefringence values and its pressure sensitivity coefficient. In order to test fiber performance when acting as a pressure sensor, the same was placed in an polarimetric setup and its spectral response was measured. A sensitivity of 4.8 nm/MPa was achieved, showing good resemblance to the expected sensitivity value (4.6 nm/MPa).
The alert did not successfully save. Please try again later.
Jonas H. Osório, Marcos A. R. Franco, Cristiano M. B. Cordeiro, "Hydrostatic pressure sensing with surface-core fibers," Proc. SPIE 9634, 24th International Conference on Optical Fibre Sensors, 96343B (28 September 2015); https://doi.org/10.1117/12.2194867