28 September 2015 200 MW hydroelectric generator stator surface temperature monitoring using a DTS system
Author Affiliations +
Proceedings Volume 9634, 24th International Conference on Optical Fibre Sensors; 963442 (2015) https://doi.org/10.1117/12.2195094
Event: International Conference on Optical Fibre Sensors (OFS24), 2015, Curitiba, Brazil
Abstract
A distributed temperature sensing (DTS) system is used to monitor the surface temperature of a high power hydroelectric generator. Two sensing fibers were installed; one is bare fiber whilst the other is jacketed with a Teflon® protection, in two distinct configurations: first, they were fixed parallel to the stator bars; secondly, they were wrapped around the stator surface. The fibers were embedded on the stator surface by using an electrically insulating resin which does not interfere with the generator operation. This technique can be used as a predictive maintenance tool.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Felipe Mezzadri, Felipe Mezzadri, João P. Bazzo, João P. Bazzo, Cicero Martelli, Cicero Martelli, Erlon V. Silva, Erlon V. Silva, Jean Carlos Cardozo da Silva, Jean Carlos Cardozo da Silva, } "200 MW hydroelectric generator stator surface temperature monitoring using a DTS system", Proc. SPIE 9634, 24th International Conference on Optical Fibre Sensors, 963442 (28 September 2015); doi: 10.1117/12.2195094; https://doi.org/10.1117/12.2195094
PROCEEDINGS
4 PAGES


SHARE
Back to Top