Supersonic diode pumped alkali lasers: Computational fluid dynamics modeling

Salman Rosenwaks; Eyal Yacoby; Karol Waichman; Oren Sadot; Boris D. Barmashenko

doi:10.1117/12.2193574

13 October 2015 Supersonic diode pumped alkali lasers: Computational fluid dynamics modeling

Salman Rosenwaks, Eyal Yacoby, Karol Waichman, Oren Sadot, Boris D. Barmashenko

Proceedings Volume 9650, Technologies for Optical Countermeasures XII; and High-Power Lasers 2015: Technology and Systems; 96500A (2015) https://doi.org/10.1117/12.2193574
Event: SPIE Security + Defence, 2015, Toulouse, France

Abstract

We report on recent progress on our three-dimensional computational fluid dynamics (3D CFD) modeling of supersonic diode pumped alkali lasers (DPALs), taking into account fluid dynamics and kinetic processes in the lasing medium. For a supersonic Cs DPAL with laser section geometry and resonator parameters similar to those of the 1-kW flowing-gas subsonic Cs DPAL [A.V. Bogachev et al., Quantum Electron. 42, 95 (2012)] the maximum achievable output power, ~ 7 kW, is 25% higher than that achievable in the subsonic case. Comparison between semi-analytical and 3D CFD models for Cs shows that the latter predicts much higher maximum achievable output power than the former. Optimization of the laser parameters using 3D CFD modeling shows that very high power and optical-to-optical efficiency, 35 kW and 82%, respectively, can be achieved in a Cs supersonic device pumped by a collimated cylindrical (0.5 cm diameter) beam. Application of end- or transverse-pumping by collimated rectangular (large cross section ~ 2 - 4 cm²) beam makes it possible to obtain even higher output power, > 250 kW, for ~ 350 kW pumping power. The main processes limiting the power of Cs supersonic DPAL are saturation of the D2 transition and large ~ 40% losses of alkali atoms due to ionization, whereas the influence of gas heating is negligibly small. For supersonic K DPAL both gas heating and ionization effects are shown to be unimportant and the maximum achievable power, ~ 40 kW and 350 kW, for pumping by ~ 100 kW cylindrical and ~ 700 kW rectangular beam, respectively, are higher than those achievable in the Cs supersonic laser. The power achieved in the supersonic K DPAL is two times higher than for the subsonic version with the same resonator and K density at the gas inlet, the maximum optical-to-optical efficiency being 82%.

Citation Download Citation

Salman Rosenwaks, Eyal Yacoby, Karol Waichman, Oren Sadot, and Boris D. Barmashenko "Supersonic diode pumped alkali lasers: Computational fluid dynamics modeling", Proc. SPIE 9650, Technologies for Optical Countermeasures XII; and High-Power Lasers 2015: Technology and Systems, 96500A (13 October 2015); https://doi.org/10.1117/12.2193574

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available