1 July 2015 Laser processing system for stitching structured patterns on large 3D parts
Author Affiliations +
Proceedings Volume 9657, Industrial Laser Applications Symposium (ILAS 2015); 96570A (2015) https://doi.org/10.1117/12.2176052
Event: Industrial Laser Applications Symposium 2015, 2015, Kenilworth, United Kingdom
Abstract
The paper addresses the development of laser based equipment to structure large surfaces (1×1×0.5m - 3×3×1.5ft) that are shaped in three dimensions. A mechanic-optical system to process curved surfaces with an acceptance angle of up to 267° is presented. The challenge is to control the combined motion of the beam delivery system with respect to distortion of the motifs and positioning tolerances. The project starting Technology Readiness Level (TRL) was 5. Currently the project is under development and at the end of September 2015 the project will reach TRL 7 after industrial-like environment testing. The proposed system will enable manufacturers to offer individualized marking for large products.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rafael Cano Zuriguel, Rafael Cano Zuriguel, Sergio Saludes Rodil, Sergio Saludes Rodil, "Laser processing system for stitching structured patterns on large 3D parts", Proc. SPIE 9657, Industrial Laser Applications Symposium (ILAS 2015), 96570A (1 July 2015); doi: 10.1117/12.2176052; https://doi.org/10.1117/12.2176052
PROCEEDINGS
4 PAGES


SHARE
RELATED CONTENT

Laser microfabrication from a commercial perspective
Proceedings of SPIE (October 07 2004)
Laser generating metallic components
Proceedings of SPIE (April 03 1997)
Applying Lasers For Productivity And Quality
Proceedings of SPIE (August 04 1986)
Strategic directions of laser technologies development
Proceedings of SPIE (January 19 1999)
Design and manufacturing tools for laser beam processing
Proceedings of SPIE (August 19 1999)

Back to Top