Exploring EUV mask backside defectivity and control methods

Christina Turley; Jed Rankin; Louis Kindt; Mark Lawliss; Luke Bolton; Kevin Collins; Lin Cheong; Ravi Bonam; Richard Poro; Takeshi Isogawa; Eisuke Narita; Masayuki Kagawa

doi:10.1117/12.2197383

9 July 2015 Exploring EUV mask backside defectivity and control methods

Christina Turley, Jed Rankin, Louis Kindt, Mark Lawliss, Luke Bolton, Kevin Collins, Lin Cheong, Ravi Bonam, Richard Poro, Takeshi Isogawa, Eisuke Narita, Masayuki Kagawa

Author Affiliations +

Proceedings Volume 9658, Photomask Japan 2015: Photomask and Next-Generation Lithography Mask Technology XXII; 965811 (2015) https://doi.org/10.1117/12.2197383
Event: Photomask Japan 2015, 2015, Yokohama, Japan

Abstract

The backside of photomasks have been largely ignored during the last several decades of development, with the exception of avoiding gross damage or defects, as almost all problems are far enough out of the focal plane to have minimal effect on imaging. Since EUV masks are reflective, and the column is held in a vacuum, scanners have been designed to utilize electrostatic chucking. With the chucking system for EUV, the requirements for the backside of the mask must be redefined to integrate concerns in substrate design, mask manufacturing, and usage. The two key concerns with respect to an electrostatic chuck are defects and durability. Backside defects can affect imaging, while potentially damaging or contaminating the tool, the mask, or even subsequently used masks. Compromised durability, from either usage or cleaning, can affect the ability of the chuck to hold the mask in place. In this study, these concerns are evaluated in three stages: minimizing defects created during mask fabrication, actions taken upon discovery of defects, and durability of the backside film with continued cleans and chucking. Data incorporated in this study includes: sheet resistance, film thickness, and optical inspection images. Incorporating the data from the three stages of fabrication, disposition, and lifetime will help us define how to structure backside EUV mask handling during mask manufacture and indicate what further solutions are needed as EUV technology transitions into manufacturing.

Citation Download Citation

Christina Turley, Jed Rankin, Louis Kindt, Mark Lawliss, Luke Bolton, Kevin Collins, Lin Cheong, Ravi Bonam, Richard Poro, Takeshi Isogawa, Eisuke Narita, and Masayuki Kagawa "Exploring EUV mask backside defectivity and control methods", Proc. SPIE 9658, Photomask Japan 2015: Photomask and Next-Generation Lithography Mask Technology XXII, 965811 (9 July 2015); https://doi.org/10.1117/12.2197383

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available