Translator Disclaimer
11 September 2015 Deposition of silver layer on different substrates
Author Affiliations +
Proceedings Volume 9662, Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2015; 96624I (2015) https://doi.org/10.1117/12.2205841
Event: XXXVI Symposium on Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments (Wilga 2015), 2015, Wilga, Poland
Abstract
The hole process of producing continuous layer with silver nanoparticles is presented in this paper. First the ink preparation and then the spray process is shown and discussed. The silver layers were obtained on sodium glass substrate. Three different ink carriers were considered and the best one has been chosen. Spray coating process was carried out using special spray can. After obtaining sprayed layers the samples were sintered in several temperatures to investigate the lowest suitable sintering temperature. After that layers resistivity were measured. Then the silver layers were cracked to produce breakthrough fracture that was investigated by a scanning electron microscope. In this paper, the authors investigated the spray coating technique as an alternative to electroplating and other techniques, considering layer resistivity, thickness and production process.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. Krzemiński, K. Kiełbasiński, J. Szałapak, M. Jakubowska, A. Młożniak, and E. Zwierkowska "Deposition of silver layer on different substrates", Proc. SPIE 9662, Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2015, 96624I (11 September 2015); https://doi.org/10.1117/12.2205841
PROCEEDINGS
6 PAGES


SHARE
Advertisement
Advertisement
Back to Top