15 October 2015 Design and implemention of a multi-functional x-ray computed tomography system
Author Affiliations +
A powerful volume X-ray tomography system has been designed and constructed to provide an universal tool for the three-dimensional nondestructive testing and investigation of industrial components, automotive, electronics, aerospace components, new materials, etc. The combined system is equipped with two commercial X-ray sources, sharing one flat panel detector of 400mm×400mm. The standard focus 450kV high-energy x-ray source is optimized for complex and high density components such as castings, engine blocks and turbine blades. And the microfocus 225kV x-ray source is to meet the demands of micro-resolution characterization applications. Thus the system’s penetration capability allows to scan large objects up to 200mm thick dense materials, and the resolution capability can meet the demands of 20μm microstructure inspection. A high precision 6-axis manipulator system is fitted, capable of offset scanning mode in large field of view requirements. All the components are housed in a room with barium sulphate cement. On the other hand, the presented system expands the scope of applications such as dual energy research and testing. In this paper, the design and implemention of the flexible system is described, as well as the preliminary tomographic imaging results of an automobile engine block.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lei Li, Lei Li, Xiaoqi Xi, Xiaoqi Xi, Yu Han, Yu Han, Bin Yan, Bin Yan, Xiang Zhang, Xiang Zhang, Lin Deng, Lin Deng, Siyu Chen, Siyu Chen, Zhao Jin, Zhao Jin, Zengguang Li, Zengguang Li, } "Design and implemention of a multi-functional x-ray computed tomography system", Proc. SPIE 9672, AOPC 2015: Advanced Display Technology; and Micro/Nano Optical Imaging Technologies and Applications, 967215 (15 October 2015); doi: 10.1117/12.2202998; https://doi.org/10.1117/12.2202998


Nonlinear problems in fast tomography
Proceedings of SPIE (September 24 2017)
Flat panel cone beam CT on a mobile isocentric C...
Proceedings of SPIE (May 02 2002)
A micro-CT system for small-animal imaging
Proceedings of SPIE (December 07 2003)

Back to Top