15 October 2015 Design and fabrication of an elliptical micro-lens array with grating for laser safety
Author Affiliations +
Proceedings Volume 9676, AOPC 2015: Optical Design and Manufacturing Technologies; 96760P (2015) https://doi.org/10.1117/12.2199362
Event: Applied Optics and Photonics China (AOPC2015), 2015, Beijing, China
With the enormous expansion of laser usage in medicine, industry and research, all facilities must formulate and adhere to specific safety methods that appropriately address user protection. The protective ellipticalal microstructure with grating is a novel technology which can provide the principal means of ensuring against ocular injury, and must be worn at all times during laser operation. On the basis of Fresnel's law and the diffractive law, Solidworks and Lighttools software are applied to design the elliptical micro-lens array and correspondent grating. The height of the microstructure is 100um and its period is 3mm. The period of grating is 5um. It is shown that the amount of emergent light of a specific wavelength (1064nm) can reflect more than 40° from the incident light through simulation, while the incident light is perpendicular to the microstructure. The fabrication adopts the ultra-precision single point diamond method and injection molding method. However, it is found in the test that the surface roughness has a serious effect on the angle between the emergent and incident light. As a result, the element can reflect the vertical incidence beam into a tilted emergent beam with a certain angular degree , as well as protecting users from laser damage injures.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
L. H. Li, L. H. Li, B. Q. Wu, B. Q. Wu, C. Y. Chan, C. Y. Chan, W. B. Lee, W. B. Lee, L. H. Dong, L. H. Dong, } "Design and fabrication of an elliptical micro-lens array with grating for laser safety", Proc. SPIE 9676, AOPC 2015: Optical Design and Manufacturing Technologies, 96760P (15 October 2015); doi: 10.1117/12.2199362; https://doi.org/10.1117/12.2199362


Study on grinding of free form optics surface in three...
Proceedings of SPIE (August 05 2014)
Process control in optical fabrication
Proceedings of SPIE (October 04 2015)
Research on non-direct reflection columnar microstructure
Proceedings of SPIE (October 14 2015)
Meaningful surface roughness and quality tolerances
Proceedings of SPIE (September 08 2010)
The SMS3D photovoltaic concentrator
Proceedings of SPIE (September 08 2008)

Back to Top