28 October 2016 Athermal design for mid-wave infrared lens with long EFFL
Author Affiliations +
Proceedings Volume 9683, 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 96830T (2016) https://doi.org/10.1117/12.2246259
Event: Eighth International Symposium on Advanced Optical Manufacturing and Testing Technology (AOMATT2016), 2016, Suzhou, China
Abstract
When the environment temperature has changed, then each parameter in infrared lens has also changed, thus the image quality became bad, so athermal technology is one of key technology in designing infrared lens. The temperature influence of each parameter in infrared lens is analyzed in the paper. In the paper, an athermal mid-wave infrared optical system with long focal length by Code-v optical design software was presented. The parameters of the athermal infrared system are 4.0 f/number, 704mm effective focal length (EFL) , 1° field of view and 3.7-4.8 μm spectrum region 100% cold shield efficiency. When the spatial frequency is 16lp/mm, the Modulation Transfer Function (MTF) of all the field of view was above 0.5 from the working temperature range -40℃ to 60℃. From the image quality and thermal analysis result, we knew that the lens had good athermal performance.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yu Bai, Yu Bai, Tingwen Xing, Tingwen Xing, } "Athermal design for mid-wave infrared lens with long EFFL", Proc. SPIE 9683, 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 96830T (28 October 2016); doi: 10.1117/12.2246259; https://doi.org/10.1117/12.2246259
PROCEEDINGS
10 PAGES


SHARE
Back to Top