28 October 2016 Design of null lens system for f/0.5 hyperboloid mirror
Author Affiliations +
Proceedings Volume 9683, 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 96831A (2016) https://doi.org/10.1117/12.2241623
Event: Eighth International Symposium on Advanced Optical Manufacturing and Testing Technology (AOMATT2016), 2016, Suzhou, China
Abstract
The aspherical mirror surface quality testing by using compensation null lens in interferometer is described in this paper. For 310mm, f/0.5 hyperboloid mirror microcrystalline components, based on the theory of aberration compensation, a kind of null lens system which is composed of three pieces of spherical lens is developed. A certain amount of spherical aberration is introduced to the null lens for compensating the deviation of aspheric surface in a normal direction. The design result shows that the primary aberration and the senior aberration are balanced well, the MTF is closed to the diffraction limit and the residual wave aberration (RMS) is less than 0.004λ (λ=0.6328μm). Every indicators of the system meets the requirements of high precision detection of null lens system design. In this paper, the errors caused by the manufacturing, testing and assembling of the null lens system are analyzed. Those errors can be divided into the symmetric error and the asymmetric error. Using the correction method, the influence of the asymmetric error is minimized which seemed bigger than the asymmetric one. Finally, analysis results show that the total residual wave aberration of the system is less than 0.0072λ, which satisfies the requirement of aspheric testing. This null lens system has been applied to aspheric processing.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zi-wu Wang, Zi-wu Wang, Pei-ji Guo, Pei-ji Guo, Xi Chen, Xi Chen, Ling-jie Peng, Ling-jie Peng, "Design of null lens system for f/0.5 hyperboloid mirror", Proc. SPIE 9683, 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 96831A (28 October 2016); doi: 10.1117/12.2241623; https://doi.org/10.1117/12.2241623
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Molded plastic lens design
Proceedings of SPIE (August 22 1996)
Design of a testing compensator for F/3 hyperbolic mirror
Proceedings of SPIE (November 08 2010)
Properties, specifications, and tolerances of GRADIUM glasses
Proceedings of SPIE (September 24 1997)
Retrofocus Optics For The Focussing Of CO[sub]2[ sub] ...
Proceedings of SPIE (March 23 1989)

Back to Top