28 October 2016 The technical research on fabricating large aperture flat SiC mirror
Author Affiliations +
Proceedings Volume 9683, 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 96831S (2016) https://doi.org/10.1117/12.2244014
Event: Eighth International Symposium on Advanced Optical Manufacturing and Testing Technology (AOMATT2016), 2016, Suzhou, China
Abstract
A 520mm aperture SiC flat mirror was manufactured up to RMS accuracy of 10.8nm in 50 days. Through the analysis of SiC material removal principle during full aperture polishing, we chose the appropriate parameters of polishing in full aperture polishing process and quickly made the surface error convergence to RMS value 100nm, then we took the step to small tool polishing, the adjustment of the remove function in this process was taken in order to coordinate the hard material’s properties, the efficiency in PV and RMS convergence was presented according to the experimental results. After four week’s polishing ,the RMS value successfully reduced to 10.8 nm and reached the technical requirements of this large flat SiC mirror.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Heng Zhu, Heng Zhao, Zhenjun Bao, Ding-yao Yan, Ping Ma, "The technical research on fabricating large aperture flat SiC mirror", Proc. SPIE 9683, 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 96831S (28 October 2016); doi: 10.1117/12.2244014; https://doi.org/10.1117/12.2244014
PROCEEDINGS
7 PAGES


SHARE
Back to Top