27 September 2016 Rigid geometric-optics autocollimation model and its theoretical analysis based on ray-tracing method
Author Affiliations +
Proceedings Volume 9684, 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment; 968441 (2016) https://doi.org/10.1117/12.2242768
Event: Eighth International Symposium on Advanced Optical Manufacturing and Testing Technology (AOMATT2016), 2016, Suzhou, China
Abstract
A rigid geometric-optics autocollimation model is established using ray-tracing method to overcome the limitations of conventional autocollimation model due to its lack of necessary parameters. The established model describes the transmission process of the light rays that are emitted from the illuminated target plane and transmit through the autocollimation system and return back to the receiving plane. Simulation results of the model indicate that the cross-talk of 2D micro-angle measurement in autocollimation can be 0.035 arcsec in a measurement range of ±1000 arcsec. The coordinate deviation of ±3 mm from the optical axis of the points on the target plane could result to a variation of -0.045 to 0.246 arcsec in autocollimation. The defocus of ±50 μm of the target plane and the receiving plane could result to an error of 0.278 arcsec. The variation of measurement distance from 200 to 2000 mm could result to a maximum error of 0.500 arcsec in autocollimation while the defocus of receiving plane is 50 μm. The established model can be used for further analysis and improvement of autocollimation.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fan Zhu, Fan Zhu, Xinran Tan, Xinran Tan, Jiubin Tan, Jiubin Tan, Zhigang Fan, Zhigang Fan, } "Rigid geometric-optics autocollimation model and its theoretical analysis based on ray-tracing method", Proc. SPIE 9684, 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968441 (27 September 2016); doi: 10.1117/12.2242768; https://doi.org/10.1117/12.2242768
PROCEEDINGS
10 PAGES


SHARE
Back to Top