Paper
14 September 1977 Analyzing Rapid Surface Motions With Moire Fringes
P. F. Fry, H. R. Taylor, H. F. Swift
Author Affiliations +
Proceedings Volume 0097, 12th Intl Congress on High Speed Photography; (1977) https://doi.org/10.1117/12.955184
Event: 12th International Congress on High Speed Photography, 1976, Toronto, Canada
Abstract
High speed photography of moire fringes was used to analyze the motion of surfaces subjected to dynamic loadings. The moire fringe device used a high power light source, a pair of Ronchi rulings, and commonly available lenses. One Ronchi ruling was projected at an angle onto the surface to be studied. The projected ruling was then imaged onto the second Ronchi ruling where a fringe pattern was produced which was characteristic of the stationary wall before impact. Any outward displacement of the surface caused a corresponding change in the original fringe pattern. Calculations of wall motion from fringe patterns were greatly simplified by the observation that each fringe can be represented as an ellipse which intersects the target (usually in two places) and both the projection and taking lenses.
© (1977) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
P. F. Fry, H. R. Taylor, and H. F. Swift "Analyzing Rapid Surface Motions With Moire Fringes", Proc. SPIE 0097, 12th Intl Congress on High Speed Photography, (14 September 1977); https://doi.org/10.1117/12.955184
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Moire patterns

Ronchi rulings

Fringe analysis

High speed photography

Light sources

Cameras

Photography

Back to Top