7 March 2016 Manufacture of micro fluidic devices by laser welding using thermal transfer printing techniques
Author Affiliations +
Abstract
Micro-fluidic devices are widely used today in the areas of medical diagnostics and drug research, as well as for applications within the process, electronics and chemical industry. Microliters of fluids or single cell to cell interactions can be conveniently analyzed with such devices using fluorescence imaging, phase contrast microscopy or spectroscopic techniques. Typical micro-fluidic devices consist of a thermoplastic base component with chambers and channels covered by a hermetic fluid and gas tight sealed lid component. Both components are usually from the same or similar thermoplastic material. Different mechanical, adhesive or thermal joining processes can be used to assemble base component and lid. Today, laser beam welding shows the potential to become a novel manufacturing opportunity for midsize and large scale production of micro-fluidic devices resulting in excellent processing quality by localized heat input and low thermal stress to the device during processing. For laser welding, optical absorption of the resin and laser wavelength has to be matched for proper joining. This paper will focus on a new approach to prepare micro-fluidic channels in such devices using a thermal transfer printing process, where an optical absorbing layer absorbs the laser energy. Advantages of this process will be discussed in combination with laser welding of optical transparent micro-fluidic devices.
Conference Presentation
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. Klein, R. Klein, K. F. Klein, K. F. Klein, T. Tobisch, T. Tobisch, D. Thoelken, D. Thoelken, M. Belz, M. Belz, } "Manufacture of micro fluidic devices by laser welding using thermal transfer printing techniques", Proc. SPIE 9702, Optical Fibers and Sensors for Medical Diagnostics and Treatment Applications XVI, 970205 (7 March 2016); doi: 10.1117/12.2219997; https://doi.org/10.1117/12.2219997
PROCEEDINGS
11 PAGES + PRESENTATION

SHARE
RELATED CONTENT

Semiconductor Lasers For Optical Scanning Systems
Proceedings of SPIE (April 26 1982)
Laser slotting of silicon for inkjet printer heads
Proceedings of SPIE (February 23 2006)
Laser Beam Processing - A Manufacturer's Viewpoint
Proceedings of SPIE (September 30 1985)
High-power diode laser technology and applications
Proceedings of SPIE (February 07 2000)
A study on 8 beam laser diode to adopt laser...
Proceedings of SPIE (February 21 2011)

Back to Top