High-power CW and long-pulse lasers in the green wavelength regime for copper welding

Sebastian Pricking; Rudolf Huber; Konrad Klausmann; Elke Kaiser; Christian Stolzenburg; Alexander Killi

doi:10.1117/12.2213293

18 March 2016 High-power CW and long-pulse lasers in the green wavelength regime for copper welding

Sebastian Pricking, Rudolf Huber, Konrad Klausmann, Elke Kaiser, Christian Stolzenburg, Alexander Killi

Author Affiliations +

Proceedings Volume 9741, High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications V; 97410G (2016) https://doi.org/10.1117/12.2213293
Event: SPIE LASE, 2016, San Francisco, California, United States

Abstract

We report on industrial high-power lasers in the green wavelength regime. By means of a thin disk oscillator and a resonator-internal nonlinear crystal for second harmonic generation we are able to extract up to 8 kW pulse power in the few-millisecond range at a wavelength of 515 nm with a duty cycle of 10%. Careful shaping and stabilization of the polarization and spectral properties leads to a high optical-to-optical efficiency larger than 55%. The beam parameter product is designed and measured to be below 5 mm·mrad which allows the transport by a fiber with a 100 μm core diameter. The fiber and beam guidance optics are adapted to the green wavelength, enabling low transmission losses and stable operation. Application tests show that this laser is perfectly suited for copper welding due to the superior absorption of the green wavelength compared to IR, which allows us to produce weld spots with an unprecedented reproducibility in diameter and welding depth. With an optimized set of parameters we could achieve a splatter-free welding process of copper, which is crucial for welding electronic components. Furthermore, the surface condition does not influence the welding process when the green wavelength is used, which allows to skip any expensive preprocessing steps like tin-coating. With minor changes we could operate the laser in cw mode and achieved up to 1.7 kW of cw power at 515 nm with a beam parameter product of 2.5 mm·mrad. These parameters make the laser perfectly suitable for additional applications such as selective laser melting of copper.

Citation Download Citation

Sebastian Pricking, Rudolf Huber, Konrad Klausmann, Elke Kaiser, Christian Stolzenburg, and Alexander Killi "High-power CW and long-pulse lasers in the green wavelength regime for copper welding", Proc. SPIE 9741, High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications V, 97410G (18 March 2016); https://doi.org/10.1117/12.2213293

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE