18 March 2016 Monitoring of solidification crack propagation mechanism in pulsed laser welding of 6082 aluminum
Author Affiliations +
Pulsed laser sources with pulse durations in the millisecond regime can be used for spot welding and seam welding of aluminum. Seam welds are generally produced with several overlapping spot welds. Hot cracking has its origin in the solidification process of individual spot welds which determines the cracking morphology along the seam welding. This study used a monitoring unit to capture the crack geometry within individual spot welds during seam welding to investigate the conditions for initiation, propagation and healing (re-melting) of solidification cracking within overlapping pulsed laser welds. The results suggest that small crack radii and high crack angles with respect to welding direction are favorable conditions for crack healing which leads to crack-free seam welds. Optimized pulse shapes were used to produce butt welds of 0.5 mm thick 6082 aluminum alloys. Tensile tests were performed to investigate the mechanical strength in the as-welded condition.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
P. von Witzendorff, P. von Witzendorff, S. Kaierle, S. Kaierle, O. Suttmann, O. Suttmann, L. Overmeyer, L. Overmeyer, } "Monitoring of solidification crack propagation mechanism in pulsed laser welding of 6082 aluminum", Proc. SPIE 9741, High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications V, 97410H (18 March 2016); doi: 10.1117/12.2209630; https://doi.org/10.1117/12.2209630


Skin welding using pulsed laser radiation and a dye
Proceedings of SPIE (June 30 1998)
High-power COIL and YAG laser welding
Proceedings of SPIE (May 05 2002)
Design of an ROV-based lidar for seafloor monitoring
Proceedings of SPIE (May 22 1997)
Laser welding of Al-Mg alloy with the thin plate
Proceedings of SPIE (January 12 2005)

Back to Top