Design and optimization of indoor optical wireless positioning systems

Mark H. Bergen; Daniel Guerrero; Xian Jin; Blago A. Hristovski; Hugo A. L. F. Chaves; Richard Klukas; Jonathan F. Holzman

doi:10.1117/12.2208722

16 March 2016 Design and optimization of indoor optical wireless positioning systems

Mark H. Bergen, Daniel Guerrero, Xian Jin, Blago A. Hristovski, Hugo A. L. F. Chaves, Richard Klukas, Jonathan F. Holzman

Author Affiliations +

Proceedings Volume 9754, Photonic Instrumentation Engineering III; 97540A (2016) https://doi.org/10.1117/12.2208722
Event: SPIE OPTO, 2016, San Francisco, California, United States

Abstract

Optical wireless (OW) technologies are an emerging field utilizing optical sources to replace existing radio wavelength technologies. The vast majority of work in OW focuses on communication; however, one smaller emerging field is indoor OW positioning. This emerging field essentially aims to replace GPS indoors. One of the primary competing methods in indoor OW positioning is angle-of-arrival (AOA). AOA positioning uses the received vectors from several optical beacons to triangulate its position. The reliability of this triangulation is fundamentally based on two aspects: the geometry of the optical receiver’s location compared to the optical beacon locations, and the ability for the optical receiver to resolve the incident vectors correctly. The optical receiver is quantified based on the standard deviation of the azimuthal and polar angles that define the measured vector. The quality of the optical beacon geometry is quantified using dilution of precision (DOP). This proceeding discusses the AOA standard deviation of an ultra-wide field-of-view (FOV) lens along with the DOP characteristics for several optical beacon geometries. The optical beacon geometries used were simple triangle, square, and hexagon optical beacon geometries. To assist the implementation of large optical beacon geometries it is proposed to use both frequency and wavelength division multiplexing. It is found that with an ultra-wide FOV lens, coupled with the appropriately sized optical beacon geometry, allow for high accuracy positioning over a large area. The results of this work will enable reliable OW positioning deployments.

Citation Download Citation

Mark H. Bergen, Daniel Guerrero, Xian Jin, Blago A. Hristovski, Hugo A. L. F. Chaves, Richard Klukas, and Jonathan F. Holzman "Design and optimization of indoor optical wireless positioning systems", Proc. SPIE 9754, Photonic Instrumentation Engineering III, 97540A (16 March 2016); https://doi.org/10.1117/12.2208722

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE