Paper
18 March 2016 Extension of practical k1 limit in EUV lithography
Author Affiliations +
Abstract
Sub 0.3k1 regime has been widely adopted for high volume manufacturing (HVM) of optical lithography due to various resolution enhancement technologies (RETs). It is not certain when such low k1 is feasible in EUV, though most technologies are available in EUV also. In this paper, experimental results on patterning performance of line space (L/S) and contact hole (C/H) in EUV lithography will be presented. First, practical k1 value with 0.33NA EUV lithography was investigated through experiment using NXE3300 EUV tool. Patterning limit, as defined by local critical dimension uniformity (LCDU) for C/H array pattern were measured with respect to various design rules. It was evaluated that the effect of off axis illumination (OAI) mode with various illumination conditions to improve the patterning performance and to reduce k1 limit. Then the experimental results of LCDU were compared with normalized image log slope (NILS) values from simulation. EUV source mask optimization (SMO) technologies to increase NILS with FlexPupil option of EUV scanner were evaluated and possibility of further improvement was also discussed.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sarohan Park, Inwhan Lee, Sunyoung Koo, Junghyung Lee, and Chang-Moon Lim "Extension of practical k1 limit in EUV lithography", Proc. SPIE 9776, Extreme Ultraviolet (EUV) Lithography VII, 97761Q (18 March 2016); https://doi.org/10.1117/12.2219546
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Nanoimprint lithography

Extreme ultraviolet

Photomasks

Semiconducting wafers

Lithography

Extreme ultraviolet lithography

Optical lithography

RELATED CONTENT


Back to Top