Metrology target design (MTD) solution for diagonally orientated DRAM layer

Myungjun Lee; Mark D. Smith; Michael E. Adel; Chia-Hung Chen; Chin-Chang Huang; Hao-Lun Huang; Hsueh-Jen Tsai; I-Lin Wang; Jen-Chou Huang; Jo-Lan Chin; Kuo-Yao Chou; Yuan-Ku Lan; Hsien-Yen Lung; Jui-Chin Yang; Tal Itzkovich; Healthy Huang; Yaniv Abramovitz; Jinyan Song; Chen Dror; Harvey Cheng; Ady Levy

doi:10.1117/12.2218659

8 March 2016 Metrology target design (MTD) solution for diagonally orientated DRAM layer

Myungjun Lee, Mark D. Smith, Michael E. Adel, Chia-Hung Chen, Chin-Chang Huang, Hao-Lun Huang, Hsueh-Jen Tsai, I-Lin Wang, Jen-Chou Huang, Jo-Lan Chin, Kuo-Yao Chou, Yuan-Ku Lan, Hsien-Yen Lung, Jui-Chin Yang, Tal Itzkovich, Healthy Huang, Yaniv Abramovitz, Jinyan Song, Chen Dror, Harvey Cheng, Ady Levy

Author Affiliations +

Proceedings Volume 9778, Metrology, Inspection, and Process Control for Microlithography XXX; 97782R (2016) https://doi.org/10.1117/12.2218659
Event: SPIE Advanced Lithography, 2016, San Jose, California, United States

Abstract

We present a novel metrology target design framework using the scanner exit pupil wavefront analysis together with Zernike sensitivity analysis (ZSA) based on the Monte-Carlo technique. The proposed method enables the design of robust metrology targets that maximize target process window (PW) while minimizing placement error discrepancies with device features in the presence of spatial and temporal variation of the aberration characteristics of an exposure tool. Knowing the limitations of lithography systems, design constraints, and detailed lithography information including illumination, mask type, etc., we can successfully design an optimal metrology target. We have validated our new metrology target design (MTD) method for one of the challenging DRAM active layer consisting of diagonal line and space patterns illuminated by a rotated extreme dipole source. We find that an optimal MTD target gives the maximized PW and the strong device correlation, resulting in the dramatic improvement of overall overlay performance. The proposed target design framework is completely general and can be used to optimize targets for different lithography conditions. The results from our analysis are both physically sensible and in good agreement with experimental results.

Citation Download Citation

Myungjun Lee, Mark D. Smith, Michael E. Adel, Chia-Hung Chen, Chin-Chang Huang, Hao-Lun Huang, Hsueh-Jen Tsai, I-Lin Wang, Jen-Chou Huang, Jo-Lan Chin, Kuo-Yao Chou, Yuan-Ku Lan, Hsien-Yen Lung, Jui-Chin Yang, Tal Itzkovich, Healthy Huang, Yaniv Abramovitz, Jinyan Song, Chen Dror, Harvey Cheng, and Ady Levy "Metrology target design (MTD) solution for diagonally orientated DRAM layer", Proc. SPIE 9778, Metrology, Inspection, and Process Control for Microlithography XXX, 97782R (8 March 2016); https://doi.org/10.1117/12.2218659

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE