25 March 2016 Metal containing material processing on coater/developer system
Author Affiliations +
Abstract
Challenges of processing metal containing materials need to be addressed in order apply this technology to Behavior of metal containing materials on coater/developer processing including coating process, developer process and tool metal contamination is studied using CLEAN TRACKTM LITHIUS ProTM Z (Tokyo Electron Limited). Through this work, coating uniformity and coating film defectivity were studied. Metal containing material performance was comparable to conventional materials. Especially, new dispense system (NDS) demonstrated up to 80% reduction in coating defect for metal containing materials. As for processed wafer metal contamination, coated wafer metal contamination achieved less than 1.0E10 atoms/cm2 with 3 materials. After develop metal contamination also achieved less than 1.0E10 atoms/cm2 with 2 materials. Furthermore, through the metal defect study, metal residues and metal contamination were reduced by developer rinse optimization.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shinichiro Kawakami, Shinichiro Kawakami, Hiroshi Mizunoura, Hiroshi Mizunoura, Koichi Matsunaga, Koichi Matsunaga, Koichi Hontake, Koichi Hontake, Hiroshi Nakamura, Hiroshi Nakamura, Satoru Shimura, Satoru Shimura, Masashi Enomoto, Masashi Enomoto, "Metal containing material processing on coater/developer system", Proc. SPIE 9779, Advances in Patterning Materials and Processes XXXIII, 97790H (25 March 2016); doi: 10.1117/12.2219106; https://doi.org/10.1117/12.2219106
PROCEEDINGS
6 PAGES


SHARE
Back to Top