21 March 2016 Helium ion beam lithography (HIBL) using HafSOx as the resist
Author Affiliations +
Abstract
Helium ion beam lithography (HIBL) is a novel alternative lithographic technique with the capacity of fabricating highresolution and high-density features. Only limited research has been performed exploring HIBL to date. HafSOx (Hf(OH)4–2x−2y(O2)x(SO4)y·qH2O) is a negative-tone inorganic resist that is one of several candidate resist materials for extreme ultraviolet lithography (EUVL) and e-beam lithography (EBL), and has been demonstrated to show high resolution, moderate sensitivity and low line-edge roughness (LER) in both EUVL and EBL. To date, no ion beam lithography work on HafSOx has been reported. In this study, we tested HafSOx as an HIBL resist and achieved a high sensitivity compared with EBL with a turn-on dose D100 ~ 2-4 μC/cm2. We obtained sub-10 nm line widths with low LER. A simple Monte Carlo simulation suggests that ionizing excitation accounts for most of the incident He ions’ energy loss.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Feixiang Luo, Viacheslav Manichev, Mengjun Li, Gavin Mitchson, Boris Yakshinskiy, Torgny Gustafsson, David Johnson, Eric Garfunkel, "Helium ion beam lithography (HIBL) using HafSOx as the resist", Proc. SPIE 9779, Advances in Patterning Materials and Processes XXXIII, 977928 (21 March 2016); doi: 10.1117/12.2219239; https://doi.org/10.1117/12.2219239
PROCEEDINGS
9 PAGES


SHARE
Back to Top