Quantitative comparison of spatial resolution in step-and-shoot and continuous motion digital breast tomosynthesis

Muhammad U. Ghani; Di Wu; Molly D. Wong; Liqiang Ren; Bin Zheng; Kai Yang; Xizeng Wu; Hong Liu

doi:10.1117/12.2216102

30 March 2016 Quantitative comparison of spatial resolution in step-and-shoot and continuous motion digital breast tomosynthesis

Muhammad U. Ghani, Di Wu, Molly D. Wong, Liqiang Ren, Bin Zheng, Kai Yang, Xizeng Wu, Hong Liu

Author Affiliations +

Proceedings Volume 9783, Medical Imaging 2016: Physics of Medical Imaging; 97836D (2016) https://doi.org/10.1117/12.2216102
Event: SPIE Medical Imaging, 2016, San Diego, California, United States

Abstract

This study compares the spatial resolution in step-and-shoot and continuous motion acquisition modes of digital tomosynthesis using a bench-top prototype designed for breast phantoms imaging. The prototype employs a flat panel detector with a 50 μm pixel pitch, a micro focus x-ray tube and a motorized stage. A sharp metal edge with a thickness of 0.2 mm was used to measure the modulation transfer function (MTF). The edge was rotated from −7.5° to +7.5° with 1.5° increments to acquire 11 angular projections using 40 kVp, 500 μA with 5.55 s per projection. In continuous motion mode, the motorized stage moved the test object for the whole exposure time at a speed of 0.377 mm/s. The impact of acquisition speed in continuous DBT was also investigated, and a high speed of 0.753 mm/s was used. In step-and-shoot mode, the cutoff frequencies (10% MTF) in projection view (0°) and reconstructed DBT slices were 5.55 lp/mm and 4.95 lp/mm. Spatial resolution dropped in the continuous motion mode of the DBT due to the blur caused by the rotation of the stage and the cutoff frequencies reduced to 3.6 lp/mm and 3.18 lp/mm in the projection view (0º) and reconstructed DBT slices. At high rotational speed in continuous motion mode, the cutoff frequencies in the DBT slices dropped by 17 % to 2.65 lp/mm. Rotational speed of the rotation stage and spatial resolution are interconnected. Hence, reducing the motion blur in the continuous acquisition mode is important to maintain high spatial resolution for diagnostic purposes.

Citation Download Citation

Muhammad U. Ghani, Di Wu, Molly D. Wong, Liqiang Ren, Bin Zheng, Kai Yang, Xizeng Wu, and Hong Liu "Quantitative comparison of spatial resolution in step-and-shoot and continuous motion digital breast tomosynthesis", Proc. SPIE 9783, Medical Imaging 2016: Physics of Medical Imaging, 97836D (30 March 2016); https://doi.org/10.1117/12.2216102

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE