Dynamic tracking of prosthetic valve motion and deformation from bi-plane x-ray views: feasibility study

Charles R. Hatt; Martin Wagner; Amish N. Raval; Michael A. Speidel

doi:10.1117/12.2216588

18 March 2016 Dynamic tracking of prosthetic valve motion and deformation from bi-plane x-ray views: feasibility study

Charles R. Hatt, Martin Wagner, Amish N. Raval, Michael A. Speidel

Author Affiliations +

Proceedings Volume 9786, Medical Imaging 2016: Image-Guided Procedures, Robotic Interventions, and Modeling; 978604 (2016) https://doi.org/10.1117/12.2216588
Event: SPIE Medical Imaging, 2016, San Diego, California, United States

Abstract

Transcatheter aortic valve replacement (TAVR) requires navigation and deployment of a prosthetic valve within the aortic annulus under fluoroscopic guidance. To support improved device visualization in this procedure, this study investigates the feasibility of frame-by-frame 3D reconstruction of a moving and expanding prosthetic valve structure from simultaneous bi-plane x-ray views. In the proposed method, a dynamic 3D model of the valve is used in a 2D/3D registration framework to obtain a reconstruction of the valve. For each frame, valve model parameters describing position, orientation, expansion state, and deformation are iteratively adjusted until forward projections of the model match both bi-plane views. Simulated bi-plane imaging of a valve at different signal-difference-to-noise ratio (SDNR) levels was performed to test the approach. 20 image sequences with 50 frames of valve deployment were simulated at each SDNR. The simulation achieved a target registration error (TRE) of the estimated valve model of 0.93 ± 2.6 mm (mean ± S.D.) for the lowest SDNR of 2. For higher SDNRs (5 to 50) a TRE of 0.04 mm ± 0.23 mm was achieved. A tabletop phantom study was then conducted using a TAVR valve. The dynamic 3D model was constructed from high resolution CT scans and a simple expansion model. TRE was 1.22 ± 0.35 mm for expansion states varying from undeployed to fully deployed, and for moderate amounts of inter-frame motion. Results indicate that it is feasible to use bi-plane imaging to recover the 3D structure of deformable catheter devices.

Citation Download Citation

Charles R. Hatt, Martin Wagner, Amish N. Raval, and Michael A. Speidel "Dynamic tracking of prosthetic valve motion and deformation from bi-plane x-ray views: feasibility study", Proc. SPIE 9786, Medical Imaging 2016: Image-Guided Procedures, Robotic Interventions, and Modeling, 978604 (18 March 2016); https://doi.org/10.1117/12.2216588

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE