26 January 2016 Design and manufacture of a bandpass filter with high transmittance and steep edge on both sides
Author Affiliations +
Proceedings Volume 9796, Selected Papers of the Photoelectronic Technology Committee Conferences held November 2015; 979610 (2016) https://doi.org/10.1117/12.2229556
Event: Selected Proceedings of the Chinese Society for Optical Engineering Conferences held November 2015, 2015, Various, China
Abstract
By using Nb2O5 and SiO2 as the coating material, a 152 layers (12 cavities) bandpass film stack with steep edge on both sides was designed. Multiple thickness control methods, including direct optical monitoring control and time control were used in coating strategy. To confirm the feasibility of this coating strategy, a process simulation was performed using Simulator software, and the simulation result indicated that relative thickness errors for all layers were less than ±0.1%. A bandpass filter with this film stack on one side was manufactured by using a plasma assisted reactive magnetic sputtering coating machine. The measuring result shows that the peak transmittance of the filter (without AR on backside) is up to 95.4%, and the steepness of both blocking slope are less than λ/100.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ruisheng Wang, Ruisheng Wang, Shaobo Lü, Shaobo Lü, Xiaojun Yin, Xiaojun Yin, Shuaifeng Zhao, Shuaifeng Zhao, Yan Sun, Yan Sun, } "Design and manufacture of a bandpass filter with high transmittance and steep edge on both sides", Proc. SPIE 9796, Selected Papers of the Photoelectronic Technology Committee Conferences held November 2015, 979610 (26 January 2016); doi: 10.1117/12.2229556; https://doi.org/10.1117/12.2229556
PROCEEDINGS
6 PAGES


SHARE
Back to Top