15 April 2016 Design of an electronic oscillator for resonant pressure sensor with non-collocated sensor and actuator
Author Affiliations +
This paper presents a simple closed loop circuit (oscillator) design for producing sustained, oscillations required to continuously vibrate the resonance based pressure sensor at its resonant frequency. For each variation in applied input pressure, the sensor’s resonant frequency varies and the circuit makes the sensor to vibrate at its new resonant frequency, thereby enabling the measurement of change in resonant frequency shift due to corresponding pressure. The resonant condition is achieved by automatic tuning of phase angle required to satisfy Barkhausen criteria. The proposed circuit is evaluated analytically and verified experimentally for different pressure sensors fabricated using various grades of Stainless Steel material.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Akila Ravindran, Akila Ravindran, Uma Gandhi, Uma Gandhi, Suresh Kaluvan, Suresh Kaluvan, Seung-Bok Choi, Seung-Bok Choi, Mangalanathan Umapathy, Mangalanathan Umapathy, } "Design of an electronic oscillator for resonant pressure sensor with non-collocated sensor and actuator", Proc. SPIE 9799, Active and Passive Smart Structures and Integrated Systems 2016, 97990U (15 April 2016); doi: 10.1117/12.2218952; https://doi.org/10.1117/12.2218952


A novel method of measurement of LC circuits Q-factor
Proceedings of SPIE (September 28 2016)
A SAW oscillator designed for sensor application
Proceedings of SPIE (October 15 2012)
New linear motor with a hybrid actuator
Proceedings of SPIE (June 06 1997)
Monolithic 2.5 Gb s clock and data recovery circuit based...
Proceedings of SPIE (September 16 1998)

Back to Top