Presentation + Paper
8 April 2016 Sizing and ranging criteria for SAR images of steel and wood specimens
Author Affiliations +
Abstract
The use of microwave and radar sensors in the nondestructive evaluation (NDE) of damaged materials and structures has been proven to be a promising approach. In this paper, a portable imaging radar sensor utilizing 10 GHz central frequency and stripmap synthetic aperture radar (SAR) imaging was applied to steel and wood specimens for size and range determination. Relationships between range and properties of SAR images (e.g. maximum amplitude and total SAR amplitude) were developed and reported for various specimens including a steel bar (2.5 cm by 2.5 cm by 28.5 cm), a wood bar (2.5 cm by 2.5 cm by 28.5 cm), a steel plate (39.7 cm by 57.9 cm by 1.75 cm), and a wood board (30.5 cm by 30.5 cm by 1.8 cm). Various ranges from 30 cm to 100 cm were used on these specimens. In our experiment, attenuation of radar signals collected by the imaging radar system on different material specimens was measured and modeled. Change in the attenuation of maximum SAR amplitude was observed in different materials. It is found that SAR images can be used to distinguish materials of different compositions and sizes.
Conference Presentation
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Viet Le, Tzuyang Yu, Jones Owusu Twumasi, and Qixiang Tang "Sizing and ranging criteria for SAR images of steel and wood specimens", Proc. SPIE 9804, Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, and Civil Infrastructure 2016, 980404 (8 April 2016); https://doi.org/10.1117/12.2218441
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Synthetic aperture radar

Radar

Imaging systems

Radar imaging

Signal attenuation

Nondestructive evaluation

Antennas

Back to Top