30 November 2015 Modeling of surface metrology of state-of-the-art x-ray mirrors as a result of stochastic polishing process
Author Affiliations +
Proceedings Volume 9809, Twelfth International Conference on Correlation Optics; 98090M (2015) https://doi.org/10.1117/12.2218750
Event: 12th International Conference on Correlation Optics, 2015, Chernivsti, Ukraine
Abstract
The design and evaluation of the expected performance of new optical systems requires sophisticated and reliable information about the surface topography for planned optical elements before they are fabricated. The problem is especially severe in the case of x-ray optics for modern diffraction-limited-electron-ring and free-electron-laser x-ray facilities, as well as x-ray astrophysics missions, such as the X-ray Surveyor under development. Modern x-ray source facilities are reliant upon the availability of optics of unprecedented quality, with surface slope accuracy < 0.1μrad. The unprecedented high angular resolution and throughput of future x-ray space observatories require high quality optics of hundreds square meters in total area. The uniqueness of the optics and limited number of proficient vendors makes the fabrication extremely time consuming and expensive, mostly due to the limitations in accuracy and measurement rate of metrology used in fabrication. In this work we continue investigating the possibility to improve metrology efficiency via comprehensive statistical treatment of a compact volume of metrology data, considered to be a result of a stochastic polishing process. If successful, the modeling could provide a feedback to deterministic polishing processes, avoiding time-consuming, whole scale metrology measurements over the entire optical surface with the resolution required to cover the entire desired spatial frequency range. The modeling also allows forecasting metrology data for optics made by the same vendor and technology. The forecast data is vital for reliable specification for optical fabrication, evaluated from numerical simulation to be exactly adequate for the required system performance, avoiding both over- and underspecification.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Valeriy V. Yashchuk, Valeriy V. Yashchuk, Yury N. Tyurin, Yury N. Tyurin, Anastasia Y. Tyurina, Anastasia Y. Tyurina, } "Modeling of surface metrology of state-of-the-art x-ray mirrors as a result of stochastic polishing process", Proc. SPIE 9809, Twelfth International Conference on Correlation Optics, 98090M (30 November 2015); doi: 10.1117/12.2218750; https://doi.org/10.1117/12.2218750
PROCEEDINGS
16 PAGES


SHARE
Back to Top