20 May 2016 2D SWIR image sensor with extended wavelength cutoff of 2.5 μm on InP/InGaAs epitaxial wafers with graded buffer layers
Author Affiliations +
Abstract
Two-dimensional photo detector arrays with a cutoff wavelength of 2.5 μm were fabricated on InP/InGaAs epitaxial wafers with graded buffer layers in a 320x256 geometry on a 12.5μm pitch. Novel growth and fabrication techniques were employed to fabricate these arrays and optimize the performance. The dark current of the detector was investigated for a wide range of temperatures. The fabricated detector array was mated with a ROIC and packaged with a multi-stage TEC and investigated further at the FPA level. The effect of the graded buffer layers on the sensor performance was investigated and the results were compared to other methods used to develop and fabricate 2D image sensors on extended wavelength materials.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Prabhu Mushini, Prabhu Mushini, Wei Huang, Wei Huang, Manuel Morales, Manuel Morales, Robert Brubaker, Robert Brubaker, Thuc-Uyen Nguyen, Thuc-Uyen Nguyen, Matt Dobies, Matt Dobies, Wei Zhang, Wei Zhang, William Gustus, William Gustus, Gary Mathews, Gary Mathews, Scott Endicter, Scott Endicter, Namwoong Paik, Namwoong Paik, "2D SWIR image sensor with extended wavelength cutoff of 2.5 μm on InP/InGaAs epitaxial wafers with graded buffer layers", Proc. SPIE 9819, Infrared Technology and Applications XLII, 98190D (20 May 2016); doi: 10.1117/12.2225109; https://doi.org/10.1117/12.2225109
PROCEEDINGS
9 PAGES


SHARE
Back to Top