Paper
17 May 2016 Athermal achromat lens enabled by polymer gradient index optics
Richard A. Flynn, Guy Beadie
Author Affiliations +
Abstract
An optical design is shown which provides simultaneous color correction over the visible spectrum and passive thermal compensation, for an f/4 doublet made of a glass and a polymer gradient index (GRIN) element. The design is enabled by a new optical model for the thermally varying GRIN element, which incorporates measured material properties from 20-40°C (limited only by the extent of the measured data set). The design is made possible because of the GRIN degrees of freedom available to the material. A color-corrected doublet is most efficient when there is a large ratio of the dispersion strength (Abbe number) between the two materials. To make that doublet athermal, however, there needs to be an equally high ratio between the thermal coefficients. The large ratio of polymer to glass thermal coefficients presents a unique advantage for GRIN: the effective GRIN dispersion coefficient can have just as large a ratio to the glass as the thermal coefficients, making for a powerful athermal achromat. To our knowledge, this is the first example of a polymer GRIN used for simultaneous chromatic and thermal correction.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Richard A. Flynn and Guy Beadie "Athermal achromat lens enabled by polymer gradient index optics", Proc. SPIE 9822, Advanced Optics for Defense Applications: UV through LWIR, 98220S (17 May 2016); https://doi.org/10.1117/12.2224124
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
GRIN lenses

Polymers

Glasses

Lens design

Optical components

Thermal modeling

Thermal optics

RELATED CONTENT

Using GRIN to save 50% lens weight for an 8x...
Proceedings of SPIE (May 11 2017)
Invited paper Status and future of polymeric materials in...
Proceedings of SPIE (January 01 1991)
Theory of color correction by use of chromatic magnification
Proceedings of SPIE (January 01 1991)
Automated optical assembly
Proceedings of SPIE (August 18 1995)
Optical design using large-scale axial gradient glass
Proceedings of SPIE (November 01 1996)

Back to Top