19 May 2016 Computed tomography: a powerful imaging technique in the fields of dimensional metrology and quality control
Author Affiliations +
Abstract
X-ray computed tomography (CT) is slowly conquering its space in the manufacturing industry for dimensional metrology and quality control purposes. The main advantage is its non-invasive and non-destructive character. Currently, CT is the only measurement technique that allows full 3D visualization of both inner and outer features of an object through a contactless probing system. Using hundreds of radiographs, acquired while rotating the object, a 3D representation is generated and dimensions can be verified. In this research, this non-contact technique was used for the inspection of assembled components. A dental cast model with 8 implants, connected by a screwed retained bar made of titanium. The retained bar includes a mating interface connection that should ensure a perfect fitting without residual stresses when the connection is fixed with screws. CT was used to inspect the mating interfaces between these two components. Gaps at the connections can lead to bacterial growth and potential inconvenience for the patient who would have to face a new surgery to replace his/hers prosthesis. With the aid of CT, flaws in the design or manufacturing process that could lead to gaps at the connections could be assessed.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gabriel Probst, Gabriel Probst, Bart Boeckmans, Bart Boeckmans, Wim Dewulf, Wim Dewulf, Jean-Pierre Kruth, Jean-Pierre Kruth, } "Computed tomography: a powerful imaging technique in the fields of dimensional metrology and quality control", Proc. SPIE 9868, Dimensional Optical Metrology and Inspection for Practical Applications V, 98680G (19 May 2016); doi: 10.1117/12.2227146; https://doi.org/10.1117/12.2227146
PROCEEDINGS
11 PAGES


SHARE
RELATED CONTENT

Defect detection in apples by means of x-ray imaging
Proceedings of SPIE (December 18 1996)
Neutron resonance radiography for security applications
Proceedings of SPIE (November 26 2002)
Three-dimensional CT data processing for inspection
Proceedings of SPIE (January 28 1999)
Coded aperture computed tomography
Proceedings of SPIE (August 24 2009)

Back to Top