Two-dimensional refractive index profiling of optical fibers by modified refractive near-field technique

A. El Sayed; Soenke Pilz; Manuel Ryser; Valerio Romano

doi:10.1117/12.2229618

27 April 2016 Two-dimensional refractive index profiling of optical fibers by modified refractive near-field technique

A. El Sayed, Soenke Pilz, Manuel Ryser, Valerio Romano

Proceedings Volume 9886, Micro-Structured and Specialty Optical Fibres IV; 98861N (2016) https://doi.org/10.1117/12.2229618
Event: SPIE Photonics Europe, 2016, Brussels, Belgium

Abstract

The refractive index distribution in the core-cladding region of an optical fiber plays an important role in determining the transmission and dispersion properties of the waveguide. The refracted near-field technique (RNF) is among the most widespread techniques used for measuring the refractive index profile of optical fibers and is based on illuminating the end-facet of a fiber with a focused beam whose vertex angle greatly exceeds the acceptance angle of the fiber, which is immersed in an index matching liquid. What one observes are then the refracted unguided rays rather than the guided rays. Nevertheless, the standard refracted near-field technique cannot be applied to a wide range of optical fibers e.g. if their shapes are not axially symmetric. In this work we demonstrate a modified method which allows 2-D imaging of the refractive index profile and thereby overcoming the axial symmetric limitation of the standard RNF. The new system is operating at 630 nm and based on the same principle of the RNF, but the optical path is reversed so that the light at the fiber end-facet is collected by an objective lens and detected by a CCD camera. The method does not require scanning over the fiber end-facet. Thus the system is faster and less sensitive to vibrations and external conditions compared to the standard RNF, furthermore it allows averaging to improve the signal to noise ratio. The spatial resolution of the system is determined by the numerical aperture of the objective and by the resolution of the CCD camera. To calibrate the setup, a reference multi-step index fiber provided by National Physical Laboratory was used.

Citation Download Citation

A. El Sayed, Soenke Pilz, Manuel Ryser, and Valerio Romano "Two-dimensional refractive index profiling of optical fibers by modified refractive near-field technique", Proc. SPIE 9886, Micro-Structured and Specialty Optical Fibres IV, 98861N (27 April 2016); https://doi.org/10.1117/12.2229618

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available