27 April 2016 Comparison of fabrication methods for microstructured deep UV multimode waveguides based on fused silica
Author Affiliations +
Abstract
The suitability of materials for deep ultraviolet (DUV) waveguides concerning transmittance, fabrication, and coupling properties is investigated and a fused silica core/ambient air cladding waveguide system is presented. This high refractive index contrast system has far better coupling efficiency especially for divergent light sources like LEDs and also a significantly smaller critical bending radius compared to conventional waveguide systems, as simulated by ray-tracing simulations. For the fabrication of 300-ffm-thick multimode waveguides a hydrouoric (HF) acid based wet etch process is compared to selective laser etching (SLE). In order to fabricate thick waveguides out of 300-ffm-thick silica wafers by HF etching, two masking materials, LPCVD silicon nitride and LPCVD poly silicon, are investigated. Due to thermal stress, the silicon nitride deposited wafers show cracks and even break. Using poly silicon as a masking material, no cracks are observed and deep etching in 50 wt% HF acid up to 180 min is performed. While the masked and unmasked silica surface is almost unchanged in terms of roughness, notching defects occur at the remaining polysilicon edge leading to jagged sidewalls. Using SLE, waveguides with high contour accuracy are fabricated and the DUV guiding properties are successfully demonstrated with propagation losses between 0.6 and 0:8 dB=mm. These values are currently limited by sidewall scattering losses.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Philipp Elmlinger, Philipp Elmlinger, Martin Schreivogel, Martin Schreivogel, Marc Schmid, Marc Schmid, Myriam Kaiser, Myriam Kaiser, Roman Priester, Roman Priester, Patrick Sonström, Patrick Sonström, Michael Kneissl, Michael Kneissl, "Comparison of fabrication methods for microstructured deep UV multimode waveguides based on fused silica", Proc. SPIE 9888, Micro-Optics 2016, 98880A (27 April 2016); doi: 10.1117/12.2227518; https://doi.org/10.1117/12.2227518
PROCEEDINGS
12 PAGES


SHARE
Back to Top