27 April 2016 Thin disk lasers: history and prospects
Author Affiliations +
Abstract
During the early 1990s, collaboration between the German Aerospace Center and the University of Stuttgart started to work on the Thin Disk concept. The core idea behind the thin disk design is the use of a thin, disk-shaped active medium that is cooled through one of the flat faces of the disk. This ensures a large surface-to-volume ratio and therefore provides very efficient thermal management. Today, the thin disk concept is used in various commercial lasers – ranging from compact, efficient low power systems to multi-kW lasers, including cw lasers and also pulsed (femtosecond to nanosecond) oscillators and amplifiers. The whole development of the Thin Disk laser was and will be accompanied by numerical modeling and optimization of the thermal and thermo-mechanic behavior of the disk and also the heat sink structure, mostly based on finite element models. For further increasing the energy and efficiency of pulsed Thin Disk lasers, the effects of amplified spontaneous emission (ASE) are a core issue. Actual efforts are oriented towards short pulse and ultra-short pulse amplifiers with (multi-)kW average power or Joule-class Thin Disk amplifiers, but also on new designs for cw thin disk MOPA designs.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jochen Speiser, Jochen Speiser, } "Thin disk lasers: history and prospects", Proc. SPIE 9893, Laser Sources and Applications III, 98930L (27 April 2016); doi: 10.1117/12.2231529; https://doi.org/10.1117/12.2231529
PROCEEDINGS
11 PAGES


SHARE
RELATED CONTENT

100-J UV laser for dynamic compression research
Proceedings of SPIE (March 15 2016)
Ti:Al2O3 laser amplifier design study
Proceedings of SPIE (April 30 1990)
High-power thin disk lasers
Proceedings of SPIE (November 07 2012)

Back to Top