29 April 2016 Agile wavefront splitting interferometry and imaging using a digital micromirror device
Author Affiliations +
Abstract
Since 1997, we have proposed and demonstrated the use of the Texas Instrument (TI) Digital Micromirror Device (DMD) for various non-display applications including optical switching and imaging. In 2009, we proposed the use of the DMD to realize wavefront splitting interferometers as well as a variety of imagers. Specifically, proposed were agile electronically programmable wavefront splitting interferometer designs using a Spatial Light Modulator (SLM) such as (a) a transmissive SLM, (b) a DMD SLM and (c) a Beamsplitter with a DMD SLM. The SLMs operates with on/off or digital state pixels, much like a black and white state optical window to control passage/reflection of incident light. SLM pixel locations can be spatially and temporally modulated to create custom wavefronts for near-common path optical interference at the optical detectors such as a CCD/CMOS sensor, a Focal Plane Array (FPA) sensor or a point-photodetector. This paper describes the proposed DMD-based wavefront splitting interferometer and imager designs and their relevant experimental results.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Juan Pablo La Torre, Juan Pablo La Torre, M. Junaid Amin, M. Junaid Amin, Nabeel A. Riza, Nabeel A. Riza, } "Agile wavefront splitting interferometry and imaging using a digital micromirror device", Proc. SPIE 9896, Optics, Photonics and Digital Technologies for Imaging Applications IV, 98960B (29 April 2016); doi: 10.1117/12.2228373; https://doi.org/10.1117/12.2228373
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT


Back to Top