26 January 2016 Experimental research of digital image correlation system in high temperature test
Author Affiliations +
Proceedings Volume 9903, Seventh International Symposium on Precision Mechanical Measurements; 990306 (2016) https://doi.org/10.1117/12.2217703
Event: Seventh International Symposium on Precision Mechanical Measurements, 2015, Xia'men, China
Abstract
Digital Image Correlation (DIC) is a full-field technique based on white-light illumination for displacement and strain measurement. But radiation on the specimen surface at high temperature affects the quality of acquired speckle pattern images for traditional DIC measurement. In order to minimize the radiation effect in high temperature measurement, this paper proposes a two-dimensional ultraviolet digital image correlation system (2D UV-DIC) containing UV LED and UV band-pass filter. It is confirmed by experiments that images acquired by this system saturate at higher temperature in comparison with DIC using filtered blue light imaging system. And the UV-DIC remains minimally affected by radiation at the temperature which is nearing the specimen’s maximum working temperature (about 1250°C). In addition, considering the heat disturbance that can’t be ignored in actual high temperature measurement, this paper also proposes a method using an air controller in combination with image average algorithm, and the method was then used to obtain the thermal expansion coefficient of the Austenitic chromium-nickel stainless steel specimen at different temperatures. By comparing the coefficients with the results calculated by other method, it shows that this comprehensive method has the advantages of strong anti-interference ability and high precision.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Li Chen, Li Chen, Yonghong Wang, Yonghong Wang, Xizuo Dan, Xizuo Dan, Ying Xiao, Ying Xiao, Lianxiang Yang, Lianxiang Yang, } "Experimental research of digital image correlation system in high temperature test", Proc. SPIE 9903, Seventh International Symposium on Precision Mechanical Measurements, 990306 (26 January 2016); doi: 10.1117/12.2217703; https://doi.org/10.1117/12.2217703
PROCEEDINGS
8 PAGES


SHARE
Back to Top