29 July 2016 Battery-powered thin film deposition process for coating telescope mirrors in space
Author Affiliations +
Abstract
Aluminum films manufactured in the vacuum of space may increase the broadband reflectance response of a space telescope operating in the EUV (50-nm to 115-nm) by eliminating absorbing metal-fluorides and metal-oxides, which significantly reduce aluminum’s reflectance below 115-nm. Recent developments in battery technology allow small lithium batteries to rapidly discharge large amounts of energy. It is therefore conceivable to power an array of resistive evaporation filaments in a space environment, using a reasonable mass of batteries and other hardware. This paper presents modeling results for coating thickness as a function of position, for aluminum films made with a hexagonal array of battery powered evaporation sources. The model is based on measured data from a single battery-powered evaporation source.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David A. Sheikh, David A. Sheikh, } "Battery-powered thin film deposition process for coating telescope mirrors in space", Proc. SPIE 9904, Space Telescopes and Instrumentation 2016: Optical, Infrared, and Millimeter Wave, 99046J (29 July 2016); doi: 10.1117/12.2234335; https://doi.org/10.1117/12.2234335
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

SDO-AIA mirror performance
Proceedings of SPIE (September 23 2009)
Optical surface refurbishment in space environment
Proceedings of SPIE (July 01 1990)
FUSE: lessons learned for future FUV missions
Proceedings of SPIE (October 11 2004)

Back to Top