11 July 2016 Gas bearing slumping and figure correction of x-ray telescope mirror substrates
Author Affiliations +
Abstract
Figure correction of thin x-ray telescope mirrors may be critical for future missions that require high angular resolution and large collecting areas. One promising method of providing figure correction is to use stress generated via ion implantation. Since stress-based figure correction strategies cannot correct high spatial frequency errors, it is critical to obtain glass with only low spatial frequency error. One method is thermal gas bearing slumping, where glass is softened while floating on thin films of gas. This method avoids introducing mid- or high- spatial frequency errors by eliminating contact between the glass and mandrel. Together, these two methods form a promising approach to fabricating mirrors for a high angular resolution, large-area x-ray observatory. In this paper we report on progress in understanding gas bearing slumping, and advancing the technology to curved geometry. We also report on continued progress on advancing the ion implantation technology toward correcting flight-sized mirror substrates.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Brandon Chalifoux, Brandon Chalifoux, Heng Zuo, Heng Zuo, Graham Wright, Graham Wright, Youwei Yao, Youwei Yao, Ralf K. Heilmann, Ralf K. Heilmann, Mark L. Schattenburg, Mark L. Schattenburg, } "Gas bearing slumping and figure correction of x-ray telescope mirror substrates", Proc. SPIE 9905, Space Telescopes and Instrumentation 2016: Ultraviolet to Gamma Ray, 990522 (11 July 2016); doi: 10.1117/12.2232500; https://doi.org/10.1117/12.2232500
PROCEEDINGS
12 PAGES


SHARE
Back to Top