Translator Disclaimer
18 July 2016 In-depth calibration of a Laue lens prototype composed of Fe and Al mosaic crystals
Author Affiliations +
The Laue lens is a developing technology for focusing soft gamma-rays, that is based on the principle of Bragg diffraction. A suitable arrangement of diffracting crystals is used to concentrate a set of parallel incoming photons onto a common focal spot. In late 2014, the Laue lens assembly station (LLAS) at UC Berkeley was used to construct a prototype lens segment, consisting of 48 5 x 5mm2 crystals - 36 iron and 12 aluminium. The segment is composed of 8 partial rings, each of which is aligned to diffract an energy between 90 and 130 keV. In December 2015 the prototype was tested and calibrated using the LLAS and results are presented here. The crystal mounting speed, accuracy of crystal position and orientation, and crystal reflectivity are addressed.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Colin Wade, Nicolas Barrière, John A. Tomsick, Lorraine Hanlon, Steven E. Boggs, Nicolai F. Brejnholt, Sonny Massahi, and Peter Von Ballmoos "In-depth calibration of a Laue lens prototype composed of Fe and Al mosaic crystals", Proc. SPIE 9905, Space Telescopes and Instrumentation 2016: Ultraviolet to Gamma Ray, 99056P (18 July 2016);


Gamma ray burst monitor on board BeppoSAX the Monte...
Proceedings of SPIE (October 15 1997)
Monte Carlo simulations of the design of a hard x...
Proceedings of SPIE (February 14 2003)
A concept for a high-energy gamma-ray polarimeter
Proceedings of SPIE (February 03 2004)
A focal plane detector design for a wide band Laue...
Proceedings of SPIE (June 20 2006)

Back to Top