18 July 2016 Development of an x-ray telescope using the carbon fiber reinforced plastic
Author Affiliations +
Abstract
We are developing an X-ray mirror using the CFRP as substrate in order to improve the angular resolution of tightlynested type X-ray telescope on board future X-ray satellites. We have fabricated Wolter-I designed monolithic CFRP mirrors and made improvements in the fabrication process. In the updated CFRP mirror, the half-power width of the reflection image by optical measurement was 0.8 arc-minutes on average. The measurement of the characterization of the updated CFRP mirrors at ISAS X-ray beam-line was performed in December 2015, and confirmed that the imaging quality of the CFRP mirror changed with increasing duration in vacuum chamber. We also present a current status of development of more intricate-structure CFRP substrate such as four-stage X-ray optics.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hisamitsu Awaki, Hisamitsu Awaki, Satoshi Sugita, Satoshi Sugita, Keiji Ogi, Keiji Ogi, Kenya Yoshioka, Kenya Yoshioka, Hironori Matsumoto, Hironori Matsumoto, Ikuyuki Mitsuishi, Ikuyuki Mitsuishi, Yuzuru Tawara, Yuzuru Tawara, } "Development of an x-ray telescope using the carbon fiber reinforced plastic", Proc. SPIE 9905, Space Telescopes and Instrumentation 2016: Ultraviolet to Gamma Ray, 990571 (18 July 2016); doi: 10.1117/12.2232650; https://doi.org/10.1117/12.2232650
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Status of ART-XC/SRG instrument
Proceedings of SPIE (July 23 2014)
ART XC SRG joint calibration of mirror modules and...
Proceedings of SPIE (August 28 2017)
X-ray calibration of the SODART flight telescopes
Proceedings of SPIE (July 10 1997)
The Swift X-Ray Telescope
Proceedings of SPIE (February 02 2004)
Chandra X-ray Observatory (CXO): overview
Proceedings of SPIE (July 17 2000)

Back to Top