27 July 2016 Production metrology design and calibration for TMT primary mirror fabrication used at multiple manufacturing sites
Author Affiliations +
Abstract
This paper describes the design of the surface metrology instrument used for manufacturing the 1.5m segmented telescope mirrors. It discusses challenges associated with the design of the instrument, tracking of segment surface data measured with the instrument and cross calibration of the instruments for use at multiple manufacturing sites. The instruments were evaluated for repeatability and reproducibility.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ulrich Mueller, Ulrich Mueller, } "Production metrology design and calibration for TMT primary mirror fabrication used at multiple manufacturing sites", Proc. SPIE 9906, Ground-based and Airborne Telescopes VI, 99060Z (27 July 2016); doi: 10.1117/12.2232036; https://doi.org/10.1117/12.2232036
PROCEEDINGS
8 PAGES


SHARE
Back to Top