27 July 2016 The 3.6m Indo-Belgian Devasthal Optical Telescope: performance results on site
Author Affiliations +
Abstract
AMOS SA has been awarded of the contract for the design, manufacturing, assembly, tests and on site installation (Devasthal, Nainital in central Himalayan region) of the 3.6 m Indo-Belgian Devasthal Optical Telescope (IDOT). The telescope has Ritchey-Chrétien optical configuration with one axial and two side Cassegrain ports. The meniscus primary mirror is active and it is supported by pneumatic actuators. The azimuth axis system is equipped with hydrostatic bearing. After successful factory acceptance at AMOS SA, the telescope has been dismounted, packed, transported, and remounted on site. This paper provides the final performances (i.e. image quality, pointing and tracking) measured during sky tests at Devasthal Observatory.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nathalie Ninane, Nathalie Ninane, Christian Bastin, Christian Bastin, Carlo Flebus, Carlo Flebus, Brijesh Kumar, Brijesh Kumar, "The 3.6m Indo-Belgian Devasthal Optical Telescope: performance results on site", Proc. SPIE 9906, Ground-based and Airborne Telescopes VI, 99064E (27 July 2016); doi: 10.1117/12.2232775; https://doi.org/10.1117/12.2232775
PROCEEDINGS
11 PAGES


SHARE
RELATED CONTENT

Effects Of Mirror Surface Ripple On Image Quality
Proceedings of SPIE (November 03 1982)
The 3,6 m Indo Belgian Devasthal Optical Telescope general...
Proceedings of SPIE (September 16 2012)
Initial concepts for CELT adaptive optics
Proceedings of SPIE (February 06 2003)
The 3,6 m Indo Belgian Devasthal Optical Telescope assembly,...
Proceedings of SPIE (September 16 2012)

Back to Top