9 August 2016 Integration and alignment through mechanical measurements: the example of the ESPRESSO front-end units
Author Affiliations +
Traditional techniques usually rely on optical feedback to align optical elements over all the degrees of freedom needed. This strongly iterative process implies the use of bulky and/or flexible adjustable mountings. Another solution under study consists in the characterization of every optomechanical elements and the integration of the parts without any optical feedback. The characterization can be performed using different 3D Coordinate Measuring Machines (like Laser Tracker, Articulated Arms and Cartesian ones) and referencing different parts like the optomechanical mounts or the optical surfaces. The alignment of the system is done adjusting the six degrees of freedom of every element with metallic shims. Those calibrated elements are used to correct the interfaces position of the semikinematic system composed by 3 screws and 3 pins. In this paper, the integration and alignment of the ESPRESSO Front End Units (FEUs) will be used as pathfinder to test different alignment methods and evaluate their performances.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Matteo Aliverti, Matteo Aliverti, Giorgio Pariani, Giorgio Pariani, Manuele Moschetti, Manuele Moschetti, Marco Riva, Marco Riva, "Integration and alignment through mechanical measurements: the example of the ESPRESSO front-end units", Proc. SPIE 9908, Ground-based and Airborne Instrumentation for Astronomy VI, 99087C (9 August 2016); doi: 10.1117/12.2233998; https://doi.org/10.1117/12.2233998


The common path of SOXS (Son of X-Shooter)
Proceedings of SPIE (July 05 2018)
Fiber feed for the CFHT Gecko spectrograph
Proceedings of SPIE (August 15 2000)
MUSE optical alignment procedure
Proceedings of SPIE (September 23 2012)
ECHARPE mechanical design
Proceedings of SPIE (September 23 2012)

Back to Top