27 July 2016 Closed-loop control for tip-tilt compensation on systems under vibration
Author Affiliations +
Abstract
Mechanical vibrations affect the performance in modern adaptive optics systems. These structural vibrations induce aberration mainly in tip-tilt modes that reduce the accuracy of the astronomical instrument. Therefore, control actions need to be taken. With this purpose we present a laboratory demonstration of vibration rejection of tip-tilt modes using closed-loop control, inducing vibration on the test bench via an eccentric motor with controllable frequency, in order to simulate the structural vibrations mentioned above. We measure the laser vibration and its tip-tilt aberration using a camera and a Shack Hartmann Wave Front Sensor. The control action is carried out by a Fast Steering Mirror (FSM).
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mario Castro, Mario Castro, Pedro Escárate, Pedro Escárate, Javier Garcés, Javier Garcés, Sebastián Zúñiga, Sebastián Zúñiga, Diego Rojas, Diego Rojas, José Marchioni, José Marchioni, Andrés Guesalaga, Andrés Guesalaga, } "Closed-loop control for tip-tilt compensation on systems under vibration", Proc. SPIE 9909, Adaptive Optics Systems V, 99093K (27 July 2016); doi: 10.1117/12.2232215; https://doi.org/10.1117/12.2232215
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

W.M. Keck Observatory adaptive optics program
Proceedings of SPIE (May 31 1994)
Final engineering test for AdOpt@TNG
Proceedings of SPIE (September 11 1998)
Adaptive optics developments at Keck Observatory
Proceedings of SPIE (June 27 2006)

Back to Top