27 July 2016 LIFT on Keck: analysis of performance and first experimental results
Author Affiliations +
Abstract
Wavefront sensing in the near infrared has become an attractive option with the advent of new low-noise infrared detectors, such as the SAPHIRA (Selex) and RAPID (CEA/Sofradir) APD arrays. The performance improvements obtained with the H2RG-based Keck I near-infrared tip-tilt sensor is motivating the implementation of a near-infrared low-order sensor for Keck II. The recently proposed focal plane sensor algorithm LIFT could fulfill this role. We show here an analysis of performance, demonstrating that LIFT would provide a significant gain (∼ 1 magnitude) over the current tip/tilt sensor at low flux, as well as the first experimental validation of LIFT on Keck with a calibration source.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
C. Plantet, C. Plantet, P. Wizinowich, P. Wizinowich, T. Fusco, T. Fusco, B. Neichel, B. Neichel, S. Ragland, S. Ragland, B. Femenia, B. Femenia, R. Rampy, R. Rampy, "LIFT on Keck: analysis of performance and first experimental results", Proc. SPIE 9909, Adaptive Optics Systems V, 990963 (27 July 2016); doi: 10.1117/12.2232545; https://doi.org/10.1117/12.2232545
PROCEEDINGS
10 PAGES


SHARE
RELATED CONTENT

ERIS: preliminary design phase overview
Proceedings of SPIE (July 07 2014)
ARGOS wavefront sensing: from detection to correction
Proceedings of SPIE (August 06 2014)
Solving the NFIRAOS calibration puzzle
Proceedings of SPIE (July 25 2016)
SUPY: an infrared pyramid wavefront sensor for Subaru
Proceedings of SPIE (June 27 2006)
LIFT, a noise effective low order focal plane sensor ...
Proceedings of SPIE (September 12 2012)

Back to Top