22 July 2016 Manufacture and final tests of the LSST monolithic primary/tertiary mirror
Author Affiliations +
Abstract
The LSST M1/M3 combines an 8.4 m primary mirror and a 5.1 m tertiary mirror on one glass substrate. The combined mirror was completed at the Richard F. Caris Mirror Lab at the University of Arizona in October 2014. Interferometric measurements show that both mirrors have surface accuracy better than 20 nm rms over their clear apertures, in nearsimultaneous tests, and that both mirrors meet their stringent structure function specifications. Acceptance tests showed that the radii of curvature, conic constants, and alignment of the 2 optical axes are within the specified tolerances. The mirror figures are obtained by combining the lab measurements with a model of the telescope’s active optics system that uses the 156 support actuators to bend the glass substrate. This correction affects both mirror surfaces simultaneously. We showed that both mirrors have excellent figures and meet their specifications with a single bending of the substrate and correction forces that are well within the allowed magnitude. The interferometers do not resolve some small surface features with high slope errors. We used a new instrument based on deflectometry to measure many of these features with sub-millimeter spatial resolution, and nanometer accuracy for small features, over 12.5 cm apertures. Mirror Lab and LSST staff created synthetic models of both mirrors by combining the interferometric maps and the small highresolution maps, and used these to show the impact of the small features on images is acceptably small.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
H. M. Martin, H. M. Martin, J. R. P. Angel, J. R. P. Angel, G. Z. Angeli, G. Z. Angeli, J. H. Burge, J. H. Burge, W. Gressler, W. Gressler, D. W. Kim, D. W. Kim, J. S. Kingsley, J. S. Kingsley, K. Law, K. Law, M. Liang, M. Liang, D. Neill, D. Neill, J. Sebag, J. Sebag, P. A. Strittmatter, P. A. Strittmatter, M. T. Tuell, M. T. Tuell, S. C. West, S. C. West, N. J. Woolf, N. J. Woolf, B. Xin, B. Xin, } "Manufacture and final tests of the LSST monolithic primary/tertiary mirror", Proc. SPIE 9912, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II, 99120X (22 July 2016); doi: 10.1117/12.2234501; https://doi.org/10.1117/12.2234501
PROCEEDINGS
17 PAGES


SHARE
RELATED CONTENT

LSST secondary mirror assembly
Proceedings of SPIE (July 06 2018)
Optical polishing of the VLT 8.2 m primary mirrors ...
Proceedings of SPIE (August 19 1996)
Polishing of a 6.5 m f 1.25 mirror for the...
Proceedings of SPIE (September 06 1999)
NOAO testing procedures for large optics
Proceedings of SPIE (March 26 1992)
Stressed lap polishing of 3.5 m f 1.5 and 1.8...
Proceedings of SPIE (January 01 1992)

Back to Top