Status of the array control and data acquisition system for the Cherenkov Telescope Array

Matthias Füßling; Igor Oya; Arnim Balzer; David Berge; Jerzy Borkowski; Vito Conforti; Josep Colomé; Rico Lindemann; Etienne Lyard; David Melkumyan; Michael Punch; Ullrich Schwanke; Joseph Schwarz; Claudio Tanci; Gino Tosti; Peter Wegner; Ralf Wischnewski; Amanda Weinstein

doi:10.1117/12.2233174

8 August 2016 Status of the array control and data acquisition system for the Cherenkov Telescope Array

Matthias Füßling, Igor Oya, Arnim Balzer, David Berge, Jerzy Borkowski, Vito Conforti, Josep Colomé, Rico Lindemann, Etienne Lyard, David Melkumyan, Michael Punch, Ullrich Schwanke, Joseph Schwarz, Claudio Tanci, Gino Tosti, Peter Wegner, Ralf Wischnewski, Amanda Weinstein

Author Affiliations +

Proceedings Volume 9913, Software and Cyberinfrastructure for Astronomy IV; 99133C (2016) https://doi.org/10.1117/12.2233174
Event: SPIE Astronomical Telescopes + Instrumentation, 2016, Edinburgh, United Kingdom

Abstract

The Cherenkov Telescope Array (CTA) will be the next-generation ground-based observatory using the atmospheric Cherenkov technique. The CTA instrument will allow researchers to explore the gamma-ray sky in the energy range from 20 GeV to 300 TeV. CTA will comprise two arrays of telescopes, one with about 100 telescopes in the Southern hemisphere and another smaller array of telescopes in the North. CTA poses novel challenges in the field of ground-based Cherenkov astronomy, due to the demands of operating an observatory composed of a large and distributed system with the needed robustness and reliability that characterize an observatory. The array control and data acquisition system of CTA (ACTL) provides the means to control, readout and monitor the telescopes and equipment of the CTA arrays. The ACTL system must be flexible and reliable enough to permit the simultaneous and automatic control of multiple sub-arrays of telescopes with a minimum effort of the personnel on-site. In addition, the system must be able to react to external factors such as changing weather conditions and loss of telescopes and, on short timescales, to incoming scientific alerts from time-critical transient phenomena. The ACTL system provides the means to time-stamp, readout, filter and store the scientific data at aggregated rates of a few GB/s. Monitoring information from tens of thousands of hardware elements need to be channeled to high performance database systems and will be used to identify potential problems in the instrumentation. This contribution provides an overview of the ACTL system and a status report of the ACTL project within CTA.

Citation Download Citation

Matthias Füßling, Igor Oya, Arnim Balzer, David Berge, Jerzy Borkowski, Vito Conforti, Josep Colomé, Rico Lindemann, Etienne Lyard, David Melkumyan, Michael Punch, Ullrich Schwanke, Joseph Schwarz, Claudio Tanci, Gino Tosti, Peter Wegner, Ralf Wischnewski, and Amanda Weinstein "Status of the array control and data acquisition system for the Cherenkov Telescope Array", Proc. SPIE 9913, Software and Cyberinfrastructure for Astronomy IV, 99133C (8 August 2016); https://doi.org/10.1117/12.2233174

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available