8 August 2016 Status of the array control and data acquisition system for the Cherenkov Telescope Array
Author Affiliations +
Abstract
The Cherenkov Telescope Array (CTA) will be the next-generation ground-based observatory using the atmospheric Cherenkov technique. The CTA instrument will allow researchers to explore the gamma-ray sky in the energy range from 20 GeV to 300 TeV. CTA will comprise two arrays of telescopes, one with about 100 telescopes in the Southern hemisphere and another smaller array of telescopes in the North. CTA poses novel challenges in the field of ground-based Cherenkov astronomy, due to the demands of operating an observatory composed of a large and distributed system with the needed robustness and reliability that characterize an observatory. The array control and data acquisition system of CTA (ACTL) provides the means to control, readout and monitor the telescopes and equipment of the CTA arrays. The ACTL system must be flexible and reliable enough to permit the simultaneous and automatic control of multiple sub-arrays of telescopes with a minimum effort of the personnel on-site. In addition, the system must be able to react to external factors such as changing weather conditions and loss of telescopes and, on short timescales, to incoming scientific alerts from time-critical transient phenomena. The ACTL system provides the means to time-stamp, readout, filter and store the scientific data at aggregated rates of a few GB/s. Monitoring information from tens of thousands of hardware elements need to be channeled to high performance database systems and will be used to identify potential problems in the instrumentation. This contribution provides an overview of the ACTL system and a status report of the ACTL project within CTA.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Matthias Füßling, Matthias Füßling, Igor Oya, Igor Oya, Arnim Balzer, Arnim Balzer, David Berge, David Berge, Jerzy Borkowski, Jerzy Borkowski, Vito Conforti, Vito Conforti, Josep Colomé, Josep Colomé, Rico Lindemann, Rico Lindemann, Etienne Lyard, Etienne Lyard, David Melkumyan, David Melkumyan, Michael Punch, Michael Punch, Ullrich Schwanke, Ullrich Schwanke, Joseph Schwarz, Joseph Schwarz, Claudio Tanci, Claudio Tanci, Gino Tosti, Gino Tosti, Peter Wegner, Peter Wegner, Ralf Wischnewski, Ralf Wischnewski, Amanda Weinstein, Amanda Weinstein, "Status of the array control and data acquisition system for the Cherenkov Telescope Array", Proc. SPIE 9913, Software and Cyberinfrastructure for Astronomy IV, 99133C (8 August 2016); doi: 10.1117/12.2233174; https://doi.org/10.1117/12.2233174
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT

The DECam DAQ System lessons learned after one year...
Proceedings of SPIE (July 24 2014)
The ASTRI/CTA mini-array software system
Proceedings of SPIE (July 17 2014)
Status of the Cherenkov Telescope Array Project
Proceedings of SPIE (July 21 2014)
Using SysML for MBSE analysis of the LSST system
Proceedings of SPIE (August 03 2010)

Back to Top