19 July 2016 Large arrays of dual-polarized multichroic TES detectors for CMB measurements with the SPT-3G receiver
Author Affiliations +
Detectors for cosmic microwave background (CMB) experiments are now essentially background limited, so a straightforward alternative to improve sensitivity is to increase the number of detectors. Large arrays of multichroic pixels constitute an economical approach to increasing the number of detectors within a given focal plane area. Here, we present the fabrication of large arrays of dual-polarized multichroic transition-edge-sensor (TES) bolometers for the South Pole Telescope third-generation CMB receiver (SPT-3G). The complete SPT-3G receiver will have 2690 pixels, each with six detectors, allowing for individual measurement of three spectral bands (centered at 95 GHz, 150 GHz and 220 GHz) in two orthogonal polarizations. In total, the SPT-3G focal plane will have 16140 detectors. Each pixel is comprised of a broad-band sinuous antenna coupled to a niobium microstrip transmission line. In-line filters are used to define the different band-passes before the millimeter-wavelength signal is fed to the respective Ti/Au TES sensors. Detectors are read out using a 64x frequency domain multiplexing (fMux) scheme. The microfabrication of the SPT-3G detector arrays involves a total of 18 processes, including 13 lithography steps. Together with the fabrication process, the effect of processing on the Ti/Au TES’s Tc is discussed. In addition, detectors fabricated with Ti/Au TES films with Tc between 400 mK 560 mK are presented and their thermal characteristics are evaluated. Optical characterization of the arrays is presented as well, indicating that the response of the detectors is in good agreement with the design values for all three spectral bands (95 GHz, 150 GHz, and 220 GHz). The measured optical efficiency of the detectors is between 0.3 and 0.8. Results discussed here are extracted from a batch of research of development wafers used to develop the baseline process for the fabrication of the arrays of detectors to be deployed with the SPT-3G receiver. Results from these research and development wafers have been incorporated into the fabrication process to get the baseline fabrication process presented here. SPT-3G is scheduled to deploy to the South Pole Telescope in late 2016.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chrystian M. Posada, Chrystian M. Posada, Peter A. R. Ade, Peter A. R. Ade, Adam J. Anderson, Adam J. Anderson, Jessica Avva, Jessica Avva, Zeeshan Ahmed, Zeeshan Ahmed, Kam S. Arnold, Kam S. Arnold, Jason Austermann, Jason Austermann, Amy N. Bender, Amy N. Bender, Bradford A. Benson, Bradford A. Benson, Lindsey Bleem, Lindsey Bleem, Karen Byrum, Karen Byrum, John E. Carlstrom, John E. Carlstrom, Faustin W. Carter, Faustin W. Carter, Clarence Chang, Clarence Chang, Hsiao-Mei Cho, Hsiao-Mei Cho, Ari Cukierman, Ari Cukierman, David A. Czaplewski, David A. Czaplewski, Junjia Ding, Junjia Ding, Ralu N. S. Divan, Ralu N. S. Divan, Tijmen de Haan, Tijmen de Haan, Matt Dobbs, Matt Dobbs, Daniel Dutcher, Daniel Dutcher, Wenderline Everett, Wenderline Everett, Renae N. Gannon, Renae N. Gannon, Robert J. Guyser, Robert J. Guyser, Nils W. Halverson, Nils W. Halverson, Nicholas L. Harrington, Nicholas L. Harrington, Kaori Hattori, Kaori Hattori, Jason W. Henning, Jason W. Henning, Gene C. Hilton, Gene C. Hilton, William L. Holzapfel, William L. Holzapfel, Nicholas Huang, Nicholas Huang, Kent D. Irwin, Kent D. Irwin, Oliver Jeong, Oliver Jeong, Trupti Khaire, Trupti Khaire, Milo Korman, Milo Korman, Donna L. Kubik, Donna L. Kubik, Chao-Lin Kuo, Chao-Lin Kuo, Adrian T. Lee, Adrian T. Lee, Erik M. Leitch, Erik M. Leitch, Sergi Lendinez Escudero, Sergi Lendinez Escudero, Stephan S. Meyer, Stephan S. Meyer, Christina S. Miller, Christina S. Miller, Joshua Montgomery, Joshua Montgomery, Andrew Nadolski, Andrew Nadolski, Tyler J. Natoli, Tyler J. Natoli, Hogan Nguyen, Hogan Nguyen, Valentyn Novosad, Valentyn Novosad, Stephen Padin, Stephen Padin, Zhaodi Pan, Zhaodi Pan, John E. Pearson, John E. Pearson, Alexandra Rahlin, Alexandra Rahlin, Christian L. Reichardt, Christian L. Reichardt, John E. Ruhl, John E. Ruhl, Benjamin Saliwanchik, Benjamin Saliwanchik, Ian Shirley, Ian Shirley, James T. Sayre, James T. Sayre, Jamil A. Shariff, Jamil A. Shariff, Erik D. Shirokoff, Erik D. Shirokoff, Liliana Stan, Liliana Stan, Antony A. Stark, Antony A. Stark, Joshua Sobrin, Joshua Sobrin, Kyle Story, Kyle Story, Aritoki Suzuki, Aritoki Suzuki, Qing Yang Tang, Qing Yang Tang, Ritoban Basu Thakur, Ritoban Basu Thakur, Keith L. Thompson, Keith L. Thompson, Carole E. Tucker, Carole E. Tucker, Keith Vanderlinde, Keith Vanderlinde, Joaquin D. Vieira, Joaquin D. Vieira, Gensheng Wang, Gensheng Wang, Nathan Whitehorn, Nathan Whitehorn, Volodymyr Yefremenko, Volodymyr Yefremenko, Ki Won Yoon, Ki Won Yoon, "Large arrays of dual-polarized multichroic TES detectors for CMB measurements with the SPT-3G receiver ", Proc. SPIE 9914, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy VIII, 991417 (19 July 2016); doi: 10.1117/12.2232912; https://doi.org/10.1117/12.2232912

Back to Top